This illustration show you guide on how to change oil for Volvo EC18 Electric machine.
Preparations:
2024 Volvo TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download
Volvo PROSIS 2023 2019 2018 Parts Catalog & Repair Manuals Free Download
Volvo Diagnostic Kit (88890300)
Volvo VOCOM 88890300 Diagnostic Kit
Procedures:
Use the same hydraulic oil that is already in the system. The hydraulic system may be damaged if different brands of hydraulic oil are mixed.
Always handle oils and other environmentally hazardous fluids in an environmentally safe manner.
Risk of burns.
Hot oil can cause severe burns to unprotected skin.
Always wear personal protective gloves, goggles and clothing when handling hot oil.
1.Place the machine in service position.
NOTE!
The drain plug of the hydraulic tank should be unrestricted accessible.
2.Turn off the machine and remove the ignition key.
3.Turn off the battery disconnect switch.
4.Provide a suitable collecting container.
5.Unscrew the drain plug (1) and drain the hydraulic oil into the container.
Figure 1
Drain plug
6.Open the hydraulic oil tank cap.
Figure 2
Hydraulic oil tank with integrated oil filter
7.Screw in the oil drain plug.
NOTE!
Use new seal!
8.Fill in new hydraulic oil through the hydraulic oil tank.
9.Install the hydraulic oil tank cap.
10.Run the machine for a few minutes while operating all hydraulic functions.
11.Check the hydraulic oil level.
For more Volvo excavator repair,please refer to Volvo excavator trouble repair
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…