There is a setting of speed limit for Volvo truck in ECU parameter,if you want to change the speed limit,you need program a new value into the ECU.So here i will show you guide on how to use Volvo PTT diagnostic software to change speed limit for Volvo Truck.
Preparations:
2024 Volvo TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download
Volvo Diagnostic Kit (88890300)
Volvo VOCOM 88890300 Diagnostic Kit
Procedures:
Connect Volvo diagnostic interface to Volvo truck DLC,then run software and select “Program”
Select “Service and maintenance”–>”Parameter,Programming”,then click “Start”
Now click “Start” icon and check the box to meet the conditions
Reading data from the control units
Now select “Vehicle ECU”,then scroll down to select “Customer Road Speed Limit”
Here the old value is 100km/h
Click to input new value 120,and click “Continue”
Make sure the value is correct,and click “Program” button
Now then new speed limit value is valid,you can see it here
Done!