Categories: Auto Coding

How to code Digital Speedometer on your instrument cluster

Several days ago,I saw a post on the bmwspot.com about how to code digital speedometer on your instrument cluster.It is a good article,I modify it ,and put it here,hope it can help you!

 

Tool you need:

  • BMW INPA or and other hardware can run it.(BMW ICOM)
  • A laptop installed NCS Expert.

 

  1. Open NCS EXPERT and load the coding profile you created earlier.
  1. Click ok “VIN/ZCS/FA,” then on “ZCS/FA f. ECU” and choose your chassis
  1. After choosing your chassis you should see ncs expert read and display your VIN number, then click on “Back”
  1. Click on Process ECU and choose KOMBI, then click on Read ECU
  1. Close the pop up window and go to your Work Folder (C:\NCS EXPERT\Work) and open up the FSW_PSW.TRC file in Notepad.
  1. Click on Edit->Find and search for “BC_DIGITAL_V” and set it from “nicht_aktiv” to “aktiv”
  1. Save the file as FSW_PSW.man and click on to overwrite the existing file.
  1. Now go to the NCS EXPERT window and “Change job” to SG_CODIEREN and “Execute Job”

 

If you followed the stept correctly, after the coding ended you should have the digital speedometer in your cluster menu. Look for it by using your BC Button to scroll through the menus. It should be the last one showing V= 0 km/h or miles/h depending on where you`re located.

The above steps are the same for coding any mods, the only thing that can change is the module name we`re working on.

TIPS:

Most used module names:

CAS – Central Access System

KOMBI – Instrument Cluster

FRM/NFRM – Light Module or Footwell ModuleCCC – Navigation module on older E series

CIC – Navigation module on newer E series

ABG – Airbag Module

auto

Recent Posts

JCB JS140/205/215 Excavator C1022-13 Coolant Temperature Sensor Open Circuit

This instruction show you guide on how to solve JCB JS140/205/215 excavator C1022-13 trouble code coolant…

2 days ago

How to Diagnostic and Repair PCC1302 PowerCommand Code 2972 – Field Overload

If the time that the Field AVR Duty Cycle is operating at maximum output is…

3 days ago

Caterpillar C9 Engine 15 164-3 Injection Actuation Pressure Voltage High

The Engine Control Module(ECM) detects the following conditions: The voltage for the injection actuation pressure…

4 days ago

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

1 week ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

1 week ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

2 weeks ago