Categories: How To

How to Configure DLA Type and Communications Port on JCB ServiceMaster

To use Servicemaster for the first time you must make sure that the correct DLA and laptop port is selected to communicate with the DLA. You will not have to do the procedure again.

 

Related Contents:

2024 JCB ServiceMaster 4 v24.3.1 Free Download for Win 10 Win11

2017 JCB Parts Plus+ and Repair Service Manual Free Download

 

Procedures:

1 Start the Servicemaster software on your laptop computer.
2 Click the ‘Other’ tab.
3 Click on the ‘General’ icon.


4 Click on the ‘DLA’ icon.


5 Double click the COM Port icon.

6 The DLA window will open. Select the `USB/Serial
DLA’ device and then click `Apply’.

Note: Older DLAs and laptop computers may not be compatible with USB ports. Choose the `Parallel/Serial DLA’ device in the DLA screen.

More topics for JCB machine,please refer to:JCB Machine Trouble Repair.

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

7 hours ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

3 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

6 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago