How to Configure/Setup Adapter for Volvo PTT Premium Tech Tool

This article is a Volvo PTT Premium Tech Tool software adapter configuration instruction.Hope it helps!

 

Volvo PTT Related Contents:

2024 Volvo  TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download

Volvo Diagnostic Kit (88890300)

Volvo VOCOM 88890300 Diagnostic Kit

 

 

1.Tech Tool settings

In Settings you are able to configure the Communication Unit.

  • Communication unit

 

To start setting up your communication unit access Settings on the Tech Tool menu or through the shortcut in the toolbar under the Product tab.

Premium Tech Tool

Tech Tool Menu Tech Tool Toolbar

 

2.Communication Unit settings

In this tab you can select which Communication Unit should be active. It is possible to have several communication units configured on the same computer.

 

Communication Unit settings [CONT.]

By default Vocom/88890020/88840133 is always installed and ready to be used in USB mode.

In the list you will also see any RP1210 A/B/C compliant driver that you have installed on your machine.

Please Note: Although Tech Tool will list any RP1210 compliant driver, only the following communication units are officially supported by Tech Tool:

  • Nexiq USB Link (USB and Bluetooth)
  • Nexiq USB Link 2
  • Noregon JPRO DLA+
  • Noregon JPRO DLA+PLC
  • Noregon JPRO DLA+Wireless (USB and WLAN)
  • Dearborn DPA 5 (only USB, Dual or Quad device)
  • Dearborn DPA 4 Plus

Note: DPA 4 Plus does not support newer vehicles (OBD2013 and OBD2014)

  • XscapeEz EZ Tap

Note: EZ Tap does not support newer vehicles (OBD2013 and OBD2014)

 

3.Activate

This option will activate the selected communication unit to be used by Tech Tool. This means that Tech Tool will look for the activated communication unit only.

Select to highlight the communication unit (adapter) to setup. Click the “Activate” button. The “Status” column for the selected adapter will display “Active” with a green check indicating your adapter is setup.

Note: If you connect a communication unit other than the currently activated one, Tech Tool will not recognize it until you activate it.

Click “OK” to save and exit the Settings window.

 

auto

Recent Posts

Jungheinrich Junior AME13 Spring-Loaded Brake Electrical Connection Removal Guide

It is necessary step to remove electrical connection cable before you do disassemble or some…

14 hours ago

How to Use Nexiq eTechnician Function Test?

Nexiq eTechnician provides a number of special tests to assist you with your vehicle diagnostic…

2 days ago

JCB JS140 Excavator P0523-68 Engine Oil Pressure Low Solution

Here car-auto-repair.com show you guide on how to repair JCB JS140 excavator P0523-68 trouble code…

4 days ago

Volvo Version 3 and 4 Truck Oil Pressure Test by Volvo Techtool

Here is the instruction show you guide on how to use Volvo TECHTOOL and VOCOM adapter to…

5 days ago

How to Solve Allison 3000 & 4000 Gen5 P071A Neutral at Stop Input Failed ON

This instruction show you guide on how to solve Allison 3000 & 4000 Gen5 transmission…

7 days ago

Mack and Volvo EPA13 GHG17 Engine NOx Conversion Monitor Test

This instruction show you guide on how to use JPRO TO perform Mack and Volvo…

1 week ago