JPRO Diagnostic software support multi-brands truck/machine diagnostics,here in this instruction show you guide on how to build connect between JPRO DLA+ 2.0 adapter and Off-highways equipments.
Preparations:
2024 JPRO Noregon Commercial Fleet Diagnostics Free Download
Procedures:
Connect a supported Noregon adapter using the appropriate Off-Highway cable.
If using a USB connection, also connect the USB cable to the computer running JPRO Commercial Vehicle Diagnostics.
Off-Highway vehicles require specific cables to match manufacturer’s connector.
1.Select the F8 key or the Connect button on the main toolbar.
2. You will be prompted for the connection type. Select the Off-Highway Connections connector button. NOTE: If you have a Demo license, this button will not be available. A progress bar in the lower left status bar will display the connection progress.
3.After connections, the Vehicle Readiness, Fault Code Information and Key Data Point’s windows are displayed.
Initially, the top portion of the Vehicle Readiness window will indicate the gathering the vehicle’s information.
Once all vehicle information has been retrieved, the health of the vehicle is displayed.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…