This instruction show you guide on how to build connection between VAS5054 and ODIS-Engineering by bluetooth.
Note:It’s not recommended to use bluetooth connection for modules programming/flashing projects.
Preparation:
Newest ODIS-E Engineering 17.0.1/12.2.0/9.0.1 Free Download
08.2023 VW ODIS 23.0.5 & 7.2.1 & 5.2.7 Diagnostic Software Free Download
Steps
Follow below picture to click “Add device”
Click “Next” after your VAS5054 device identification
Input pairing code and click “Next”
After pairing successfully, open VAS5054 bluetooth properties, record COM port number.
In this example COM port number is COM4
Go to START menu to select “EDIS Hardware Installation”, then select “ADD EDIC…”
Select “VAS5054”, then hit “OK”
Select “COM4” port (depend on VAS5054 bluetooth properties you record before )
Then hit “OK”
Now it will show you bluetooth connection build successfully
Note: if you can not get below picture show, please repeat above steps.
If you connecting VAS5054 with ODIS-Engineering by USB, it no need do any setting.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…