This instruction show you guide on how to correct injector for HINO truck by HINO DX3 diagnostic software.
Related Contents:
2024.03 HINO Diagnostic Explorer DX3/DX2 Diagnostic Software Free Download
HINO Trucks EPC Electronic Parts Catalog 2018 2016 Free Download
Procedures:
1.Select Inspection Menu on the System Selection screen.
2.Select Engine in the system, select Injector correction, and click or press the [OK] button.
3.The Injector correction screen appears
Writing to ECU
A function to write the Injector correction value to the specified cylinder.
1.Check the cylinder where the value will be written, adjust the Injector correction value, and click or press the [Write to ECU] button.
2.Check the content of the message; then click or press the [OK] button.
(Writing to ECU Confirmation screen)
3.When writing is completed, the successful screen is displayed.
(Writing to ECU Successful screen)
Reading from ECU
A function to read the injector correction value of the specified cylinder from the ECU.
1.Check the cylinder to be read; then click or press the [Read out ECU] button.
(Injector correction screen)
2.The Injector correction value is read from the ECU and the display is updated.
Saving data in a file
A function to save the injector correction value of the specified cylinder in a file.
1.Check the cylinder that saves the Injector correction value; then click or press the [Save the file] button.
2.Set the location where the file is to be saved and file name; then click or press the [Save] button.
(Saving file dialog)
3.When the file has been saved, the success screen is displayed.
Retrieving a file
A function to read the Injector correction value saved in a file.
1.Click or press the [Read out file] button.
2.Specify the file to be read; then click or press the [Open] button.
3.All cylinder data contained in the file is read and the display is updated.
More case for HINO please refer to:HINO Trouble Repair.
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…