This instruction show you guide on how to crank MTU 12V 4000 engine manually.
Related Contents:
MTU DiaSys 2.74 2.72 Engine Diagnostic Software Free Download
MTU Diagnostic Tool USB-to-CAN with MTU Diasys 2.73
What you need？
Cranking engine manually (tool mounted on side)
1 Remove guard plate.
2 Engage cranking tool (2) in ring gear (3) and mount on flywheel housing.
• Use cranking tool F6555766.
3 Fit ratchet (1) onto cranking tool (2).
4 Rotate crankshaft in normal direction of engine rotation; apart from the normal compression resistance, there should be no resistance.
5 Cranking tool is removed by same procedure in reverse.
Cranking engine manually (tool mounted underneath)
1 Remove grounding device or guard plate.
2 Engage cranking tool (2) in ring gear (1) and mount on flywheel housing.
• For 12/16V engines, use cranking tool F6555766 with adapter F6558528.
• For 20V engines, use cranking tool F6783293.
3 Fit ratchet (3) onto cranking tool (2).
4 Rotate crankshaft in normal direction of engine rotation; apart from the normal compression resistance, there should be no resistance.
5 Cranking tool is removed by same procedure in reverse.
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…
This instruction show you guide on how to use AGCO EDT diagnostic software to perform…