Here car-auto-repair.com show you a guide on how to disable IMMO Bosch MED9.1 ECU for Audi TT,Audi Q7,Audi A6L,VW Touareg and VW Golf 6.
Real Test Vehicle Models:
Audi TT 2007,Audi Q7 2011,Audi A6L 2.0T 2011,VW Touareg 3.6L 2008,VW Golf R 2.0T 2011
Step 1:Read out EEPROM file of ECU
Open Bosch MED9.1 cover,here is guide on ECU disassemble: EDC16/EDC17/MED17 ECU Opening Guide
Use KTAG to read out Bosch MED9.1 EEPROM data file (P64 protocol)
After you reading,you will get 3 file:FLS file,Eeprom file and compressed files
Note:The EEPROM file must be a 2KB or 4KB file,otherwise it is can not use for next step.
MED17(32KB),EDC17(64KB) and 128KB file can not be use to next step.
Step 2:Generate IMMO Disable File
Download–> Bosch MED9.1 IMMO Disable software
Run it,click “Open EEPROM” to load EEPROM file read out on step 1.
Then it will show you the VIN information as below
Then click “IMMO OFF”,after then it will modify the EEPROM data file and prompt you “IMMO is disable,please save EEPROM”
Click “Save EEPROM” to save file on your laptop
Step 3:Write EEPROM File Back to ECU
Use KTAG to write EEPROM file save on step 2.
Note:Before write data file back to ECU,please tick “EEPROM” option,then start to do write operation.
Then install the ECU back to vehicle,and test the immobilizer system.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…