Categories: Auto Coding

How to Do Brake Pad Warning Light Deactivation via VCDS

This short instruction will show you guide on how to do brake pad warning light deactivation by VCDS for VW Polo. More repair case about VW Polo, please refer to VW POLO REPAIR.

Procedures:

Connect VCDS to VW Polo OBD port, and running it.

Select “17-Instruments”

Select “Coding-07”

+01= Brake Pad Warning installed

Input “00132” then click “Do It!”

Click “Go back”, function is ready.

 

If you want to know more about VCDS function, please refer to VCD cases.

Kevin

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago