How to Enable Audi MMI Emergency Update Firmware 900 And Later

In latest firmware versions (900 and later) the “Emergency Update” has been disabled, but using a script we can enable it again.

Related Contents:

How to Update Audi MMI Map

How to Active Audi MMI Map:3G &3 GP

How to update Audi MMI 3G Firmware

How to Enable Audi MMI Green Menu (Hidden Menu) by VCDs & Script

 

Note:The script only works with SD, it doesn’t work with USB.Remove all devices from car (Others SD, USB…) for avoid errors.

 

Download the “Enable Emergency Update” script and format your SD in FAT32.

Copy the script’s files in the SD root (like picture below).

1

Make sure that MMI is fully booted (press all buttons once RADIO CAR NAV MEDIA TEL).Wait until all options are ok (no options in gray) even when all options are ok wait a minute more.

Is the moment for insert the SD in slot 1.

Don’t touch anything

After a few seconds a screen will pop up, press any key (we suggest the big knob) once

2

Wait and don’t touch anything

After some seconds/minutes the script will finish and another screen will appear.

3

Remove the SD before doing anything

Reboot Your MMI

MMI 2G                      SETUP + Main (Big) Button + Top Right Button

MMI 2G (A8)             TEL + Main (Big) Button + Top Right Button

MMI 3G                       SETUP + Main (Big) Button + Top Right Button

MMI 3GP                    MENU + Main (Big) Button + Top Right Button

MMI 3GP (A1)            TONE + Main (Big) Button + Top Right Button

RMC (A1/Q3)             BACK + Main (Big) Button + Top Right Button

RMC (A6/A7)             MENU + Main (Big) Button + Top Right Button

MIB                               MENU + Main (Big) Button + Top Right Button

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

2 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

5 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago