How to Install and Quick Start PSA-COM Diagnostic Software

This article show a guide on how to install PSA-COM diagnostic software, hope this guide can help you to solve your installation projects.

 

Download PSA-COM software: PSA-COM For Professional Peugeot/Citroen Diagnostic software Free Download

 

Procedures:

Insert attached CD to your CD-ROM.

Run installation file PSAComSetup.exe

Choose language of installer

Choose your destination folder for PSA-COM

PSA-COM interface drivers are automatically updated during PSA-COM installation. When prompted to install„unsigned“ drivers, click on „Install this driver software anyway“ (Microsoft® Windows® 7) or „ContinueAnyway“ (Microsoft® Windows® XP. ).

Microsoft® Windows® will automatically install drivers when you plug-in the PSA-COM interface to USBport.

You should not be connected to a vehicle until now.

Please note: all program files (including updates) and documentation are available on enclosed CD-ROM.

 

Connect PSA-COM to the vehicle – starting with diagnosis.

Connect the PSA-COM interface to your computer. LED indicator should start blinking.

Connect PSA-COM to OBD-II connector in the vehicle.If you cannot find location of the OBD-II connector, you can use PSA-COM location image database,available under OBD-II Connector location from main menu:

Set-up PSA-COM application.

Select Settings from PSA-COM main menu and configure PSA-COM interface port. If no ports are shown, click Refresh button.Then choose appropriate port and click on Test Interface to makesure everything is OK. Then you should see updated interfaceinformation. Click on Apply changes or Save changes button tosave changes and return to main menu.

Your computer is ready to connect to control units now. In main menu, you can use either direct control unitselection (by clicking on Select Control unit button), or perform Auto-scan that will list all control units presentin the vehicle. Before you get to choosing the control units, you must enter exact vehicle model, otherwisediagnosis may fail.

Kevin

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

20 hours ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago