This instruction show you guide on how to install Doosan excavator DMS-5 v1.6.3 diagnostic software by yourself.
Preparations:
Doosan Data Monitoring System DMS-5 DMS-3 Free Download
Procedures:
After download you will get below files,double click “DMS-5_v1.6.3” to start installation.
It will show you a ID,copy this ID send it to carautorepair01@gmail.com.
Our tech team will generate a name and register code information and send it to your.
Input name and register code,then click “Register”
It will prompt register successfully,click “OK”
Now here default installer language is Korean,click “Next”
Click “Next”
Input information,then click “Next”
Click “Start” to begin installation
Click “Finish”
Go to “replace file” folder to copy “DMS-5”
Then copy it to C:\Program Files (x86)\Doosan\DMS-5 folder to replace original file
Now run DMS-5 on desktop
Go to below setting option to change display language to English
Close it,then restart DMS-5
After then language will show as English.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…