This illustration show you guide on how to install FUSO MUT-III diagnostic software.
Related Contents:
FUSO MUT-III MUT-3 2016 2014 Diagnostic Software Free Download
Procedures:
After finish download,then extract rar file
Double click setup file to start installation
Please click “Yes” button to install the software.
The following screens will be displayed. Installation will start.
After a while, the following screen will be displayed.
Please click “Next” button
NOTE: This procedure takes about 5 minutes.
After the following screen is displayed, please click “Finish” button.
If the following screen is displayed, click the “Next” button.
If the following screen is not displayed, go to (12).
If the following screen is displayed, click “Install this device software anyway”.
After the following screen is displayed, please click “Finish” button.
After the following screen is displayed, you can remove the CD-ROM from CD drive.
Click “OK” button then the installation of “MUT-III system” is completed.
PC will restart automatically.
Double click the icon “FUSO MUT-III” on desktop, to start the MUT-III system.
Administrator user can use MUT-III system.
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…
This instruction show you guide on how to use AGCO EDT diagnostic software to perform…