How to Install GM GDS2 Software on Win XP/7/8

There are many GM GDS software version on internet,and for the different version need to use compatible interface,the installation methods are different,so here collection of GM GDS2 installation guide here.

 

GM GDS2 Installation Requirements:

A minimum of 2 GB of RAM is required to run GDS 2. Download and installation time is dependent upon the internet bandwidth available during the download process. The GDS 2 application needs to be loaded on each shop PC individually. Once the initial application installation is complete, GDS 2 will run in either a standalone mode when launched from the PC desktop icon or from TIS2Web.

 

Before installation,you can download the GM GDS2 Software Here.

 

How to install GM MDI Manager 8.3.103.39 on Windows 7? (Main steps)

1.Run Setup.exe→ I accept… → Select language ” nao en”, “opel en”→ Install Global TIS

2.Global TIS Registration→ Edit dealership data→ Email registration→ Save “Registration PDF” file to seller for GM MDI software activation→ Complete Subscriber ID and License Key

3.Install Adobe Reader→ Install Java→ Install GDS2 8.3.103.39 GM MDI Software→ Install Tech2win→ Set Tech2win language

4.Install wizard for RNDIS/ Ethernet Gadget

5.Set Local Area Connection 2 Properties→ Internet Protocol (TCP/IP)

6.Open GM MDI Manager→ Connect→ Open Global TIS→ Yes→ OK

7.Open Tech2win→ Choose Configuration: nao en→ “Security” tab→ Download then run Security Access Service Client

Choose Configuration: opel en→ “Security” tab→ Download then run Security Access Service Client

Go to “GDS2” tab→ Start GDS2→ Select language

8.Launch GDS2 and now enjoy the software

 

 

Download Software Install Guide

1- Install GDS2Install then install GDS2JavaInstall

2- Put the zip file called deliverable GM Global or OpelVauxhall v2018.1 into the below folder:

3- Open GDS2 and click Manage Diagnostics Packages

4- Click on browes

5- Then go to: C:\ProgramData\GDS2\PersistentData\Downloads\DataBackups

6- Then click for exemple on deliverable_OpelVauxhall v2018.1 and click on open

7- GDS2 will restart

Finally you can enjoy your software

 

VADIAG NANO GM GDS2 Software Installation Guide:

Compatible Interface:

http://www.uobdii.com/wholesale/vxdiag-vcx-nano-for-gm-opel-gds2-wifi-version.html

Insert the CD into the computer running WIN7/8 64bit

Firstly Install VMware player
1)Open DVD, click “VMware player” to finish VMware Player setup.

2). Back to the DVD files, copy the folder “GDS2 VM”, then paste it into you local disk for example Local Disk(E:)

3) Go to the desktop, open “VMware Player”.

4). Load “GDS2 VM”, open “Win_XP_GDS_11_2014

5) Play virtual machine

6) Disable network connection before continue operating.
Go to “My Computer”, then device manager, check if the “USB Serial Port (Com3)” display

7) Open “VX Manager” on the desktop.

8) Open “GDS2” on the desktop. Click “Diagnostic”.

You now can use GDS software diagnostic your GM vehicle.

auto

Recent Posts

Allison 3000 & 4000 Gen5 Fault Code P070C Transmission Fluid Level Sensor Circuit Low

Here is the instruction show you guide on how to solve Allison 3000 & 4000…

24 hours ago

Detroit GHG17 Heavy Duty Engine Power Verification With Chassis Dynamometer

Detroit GHG17 Heavy Duty Engine Power Verification With Chassis Dynamometer. The chassis dynamometer is a…

4 days ago

How to Perform Fuel System Test for Kohler Engine EFI System

Here is the instruction show you guide on how to perform fuel system test for…

5 days ago

Fiat and GM ECU 7.9.6 Components Diagram

Vehicles: Vectra 2.0 Flex and Astra Flex More ECU PINOUT Components: ECU Modules Repair Pinpout…

6 days ago

How to Repair Deutz EMR3 SPN 523562 Trouble Code

Error description INJECT. PERIOD ZYL.2 Begin of injection of cylinder 2: the ECU can not…

1 week ago

How to Remove Main Fuel Tank for CLAAS AXION 950 Tractor?

Here is the instruction show you guide on how to remove main fuel tank for…

1 week ago