This instruction show you guide on how to install Orange 5 programmer software
Orange 5 Programmer Software Download & How to Use
OEM Orange 5 Programmer software XP installation:
Note:For OEM Orange 5 programmer software,you do not need install software.Only install the Orange 5 programmer interface driver,after then you can use software directly.
Open the download folder,and click to open [software] folder
Copy the “orange 5 v1.34” folder to desktop
Connect OEM Orange 5 Programmer to PC,then it will prompt you to install
Select “Install from a list or specific location (Advanced)”,and click “Next”
Select “Include this location in the search”
Click “Browser” to select the driver file you paste on desktop,then click “OK” to continue
Please wait while the wizard installs the software
Right click “My Computer” and select “Manager” to open “Computer Management”
Select “Device Manager”
Now check the “ORANGE5 USB”,it show can not work.
Please disconnect Orange 5 programmer and then connect it to PC again
Now check the driver work normally.
Open the orange 5 v1.34 folder you paste on desktop
And double click “orange” to run it
Now you can use Orange 5 software.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…