How to Install VCP System Diagnostic Tool Software

This article i want to share the guide on how to install VCP System professional diagnostic tool software.Hope it helps!

 

Preparation:

VCP System Professional Diagnostic Tool Software Download

 

Basic Installation:

Extract the setup.exe file out of the downloaded ZIP archive.

Define the Application location. We recommend to create the folder directly in the local drive: For example: C:\VCP8

Microsoft Visual C++ Confirm the Installation steps for Visual C++ Components

Driver Installation

The Driver Setup of the new Interface Generation v2.0 consists of

2 components:

VCP Interface Dongle, HID Global SmartCard Reader

Confirm every step of the Driver Setup procedure.

Driver Setup of the new Interface Generation v2.0 Confirm the following steps.

Driver Setup for the integrated HID SmartCard Reader

Confirm each step of the Driver Setup procedure for the integrated SmartCard Reader.

Basic Installation Successfully Completed

Press NEXT and then FINISH to close the dialogue box. The ACTIVATOR will open afterwards.

 

Device Driver Installation

In the Driver dialogue box you can monitor whether the installed drivers were correctly assigned (no driver will be assigned to the SmartCard; this will be first possible in Windows 8 (the Smart Card will also be correctly displayed)).

If you encounter any problems at this stage, we suggest to try and connect the Interface to a different USB port. The assignment of the driver may take up to 5 minutes depending on the hardware configuration.

You can now start using the new VCP Activator version v6.

Interface and Smart Card drivers installed successfully

auto

Recent Posts

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

2 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

5 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago

How to do Perform Cylinder Cut-off Test for Massey Ferguson Tractor

This instruction show you guide on how to use AGCO EDT diagnostic software to perform…

2 weeks ago