Categories: ECU Chip Tuning

How to Make Checksums for ECU Files with WinOLS

This is a little tutorial show how to make checksums for ECU files with WinOLS.

WinOLS Video+PDF Tutorial Download

 

Checksums are very important, get them wrong and car will not start or even worse.

1.If you have not installed WinOLS 2.24 first, then do so, it can be found here:

WinOLS Free Download for Win XP/Win 7 Installation

2.Open winols, and after you will see the empty working box, picture 1A.

Now drag and drop your ecu file onto this box as in picture 1B.

Now in picture 1

You can see there are 3 checksums that need correcting, WinOLS will do this for you.

Included are two ecu files, Audi A6 3.0 lambda off ME7.1.1, one with “nochecks” (no checksum) and the other with “csok” (checksum ok).

https://mega.nz/#!5c1HgA6J!WtaxwNDqaesv5fjMxKFd96e1bs3w2BEYLymN5nyssQw

 

Click “OK”

“A checksum needs to corrected even though this seems to be an original data file.Do you want it to be corrected?”

Click “Yes”

Click “OK”

Check ECU info,then click “OK”

Below Picture 5 show the progress

Select “Project”à”Ex-& Import”à”Export file”

Please enter name and a description for the new version,then click “OK”

Then select the file format as “Binary file”,then click “OK”

Change name of file by adding csok=(checksum ok),then press save

All finished your new file will be whatever you named it but with “csok”

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

1 day ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

4 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago