This article show a guide on how to program a pic to work with Multidiag 2017 III SP4
First : You have to install Multidiag WITHOUT internet connected. It’s not difficult to find it to download.Serial to install it : 033918
Download link :
ACTIA Multidiag 3/2017 41.06:
https://mega.nz/#!wqIigCbD!PR7xGKJgtC2Ey0do–64gMe3RsaDgoD27Dq68apmBvQ
dvd 3.2017_41.06 multidiag
https://mega.nz/#!43QQmS7B!vecthEtazucRBaINE8Jw0dqCPt6_kSgXsFmd68yUTsU
ACTIA Related Contents:
ACTIA Multi-diag Crack 2018 Software Free Download
How to Install Crack ACTIA Multi-diag Software
– Second : You must have a old interface of multidiag. Black and yellow
– Third : To program it you have to buy Pickit 3 to connect to the 12F629 with an easy clip without desoldering it.
– Program it with the VDD + 5v (don’t forget to note the oscal value before programming)
And it’s OK
Need the Hex file ? No problem !
https://yadi.sk/d/IpuMv0nu3QmHJy
And the keyupdate :
https://yadi.sk/d/0d7Tgqw23QmRMb
This drivers only:
https://mega.nz/#F!WUEnXK7I!M8Wg4MHBX0jLFTeRBoXz1w
Actia PassThru+ XS 207U Driver
1/wiring for 12F629 and pickit 3
2/Pic12F629 on actia vci
3/Clip for programming without soldering
