Categories: Do It Youself

How to paint the auto wheels by yourself

In this article i gonna to share the experience about how to auto paint  wheel by yourself.

1.Take Wheel Off your Car
2.Use soap water clean the wheel,and make sure you get all the grease off.


3.Metal wire brush on angle grinder to smooth down the whole surface of steel wheel.(or use sand paper,it will take you a long time to do it.)


4.Use electric blower to blow all the dust off the wheel.


5.Use alcohol to clean the wheel


6.Put index cards between ring and tire all the way around.(index cards protect tire from spray primer)


7.Spray Primer 3 times.(coated one time every 2-3 minutes)


8.Spray the color you want with TRIM & BUMPER PAINT 3 times.


Note: Put the primer and paint into warm water(32-38℃)

At the end of article,you can watch detail on video guide.

auto

Recent Posts

QSK60 CM2358 Engine Camshaft Speed/Position Sensor Data Erratic Incorrect

This illustration show you guide on how to repair Cummings QSK60 CM2358 engine camshaft speed/position…

5 days ago

Fendt MT800E Tractor DEF Tank Temperature Does Not Change Solution

Here is the instruction show yo guide on how to solve Fendt MT800E tractor DEF…

1 week ago

HITACHI Construction 4JJ1 P0092 Fuel Pressure Regulator Control Circuit High

Here car-auto-repair.com show you guide on how to solve ISUZU construction 4JJ1 engine P0092 fuel…

1 week ago

How to Solve Perkins 1106D EPG Engine E398 Low Fuel Rail Pressure Error

Here is the illustration show you guide on how to solve Perkins 1106D electric power…

1 week ago

Deutz EMR3 Aassembly Inspection and Initialisation Test Guide

Here comes the instruction on how to use SerDia2010 to perform assembly inspection and initialization…

1 week ago

HITACHI ZX-5 Excavator No Load Max Differential Pressure Measurement Guide

This instruction show you guide on how to perform No load max differential pressure measurement…

2 weeks ago