A VW Jetta Bora owner lost all key and he want to program a new key. Today i will share with you How to Program Key for VW Bora All Key Lost. And I will share the video guide at the end of article,you can watch the video to get detail.
First use SKP-900 to read VW Bora pin code then to program a new key.
Step1. Turn ignition on and connect SKP900 with car via OBD port. Choose “Immobilizer”→ “VW” → “Read Pin code1” → “Password Reading SYS1”
Wait a minute and SKP900 read out the pin code as 3904.
Step2. Back to “VW” menu and choose “Jetta 10-”.
Choose “Immobilizer System” then “Yes”. It will show you car control computer info, click “Yes”.
Step3. Choose “Program Key”
Enter the pin code 3094 and confirm.
It will show current key number: 1
Input key number to be programmed: 1
Step4. Now use all matching keys to turn on ignition. It will soon show “Matching Finished”.
In this way you can use SKP-900 to program a new key for VW Bora all key lost situation!
Here share the video guide on How to program new key for VW Bora All Key Lost.
It is necessary step to remove electrical connection cable before you do disassemble or some…
Nexiq eTechnician provides a number of special tests to assist you with your vehicle diagnostic…
Here car-auto-repair.com show you guide on how to repair JCB JS140 excavator P0523-68 trouble code…
Here is the instruction show you guide on how to use Volvo TECHTOOL and VOCOM adapter to…
This instruction show you guide on how to solve Allison 3000 & 4000 Gen5 transmission…
This instruction show you guide on how to use JPRO TO perform Mack and Volvo…