This instruction show you guide on how to remove and install throttle position sensor for Chevrolet Avio. More repair case for Chevrolet,please refer to Chevrolet Trouble Repair
Related Contents:
GM EPC GMIO GMNA General Motors EPC 2021 2017 Free Download
GM GDS2 2019 v20.3.05100 Software Free Download
Procedures:
Removal Procedure
1.Disconnect the battery negative cable.
2.Remove the air cleaner assembly.
3.Disconnect the throttle position sensor (TPS) connector
4.Remove the TPS retaining bolts (1).
5.Remove the TPS (2).
Installation Procedure
1.Install the TPS (2).
2.Install the TPS retaining bolts (1) and tighten to 2.7 N·m (23.9 lb in).
3.Connect the TPS connector.
4.Install the air cleaner assembly.
5.Connect the battery negative cable.
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…