Categories: Auto Repair

How to Remove BMW CAS MC9S12 1 Series 2004-2012

In this instruction car-auto-repair.com show you guide on how to remove CAS MC9S12 module for BMW 2 Series 2004-2012.This is one of instruction of DashBook Pro v7.9+SRSBook 1.4 2018 Removal Book 100% Work Solution

 

Procedures:

Remove the CAS

Disconnect protective edging (1) in the region of the left pad (2), the dashboard in the direction indicated by the arrow.

Unclip the left cover (2) instrument panel at the points(3) and remove it.

Release the left ventilation gritle(1) of the clips at (2).

Unlock the clips(3)

Remove the left ventilation grille (1) in the direction indicated by the arrow.

Release screws(1) and(2).

Remove the expanding rivet(3).

Pull the trim(4) ago.

Disconnect the appropriate connectors and remove the trim(4).

 

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

1 day ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago