This instruction will show you guide on how to remove trunk tail and lid liner panel for Mercedes-Benz W212 E-Class estate 2009-2016.
Here is another article about Benz E-Class repair cases for your reference.
Top 5 problems with the W212 Mercedes-Benz E Class 2010-2016
Steps:
Use a tool to take out the plastic plates
Use TORX T25 unscrew bolts
Take out the panel, then unlock the clips (Cover clip A000 991 90 98)
You can remove the lamp without removing the entire lining
Cover clip A 000 991 89 98
Wiper motor A 212 906 44 02
Use 8mm TORX unscrew bolts
Take out the tail lights
There’s water inside, we need to replace a new one.
Condensation all lamps need a new seal. Already fixed this one with new silicone.
More cases about Benz, please visit here: BENZ TROUBLE REPAIR.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…