HINO DX3 allows you to reset HINO truck ECU learned values.This instruction show you guide on how to do that.
Related Contents:
2024.03 HINO Diagnostic Explorer DX3/DX2 Diagnostic Software Free Download
HINO Trucks EPC Electronic Parts Catalog 2018 2016 Free Download
Procedures:
1 Select Learned Values on the System selection screen.
(System selection screen)
2 When you select a system, a list of Learned Values set for the device is displayed.
(Learned Values screen)
3 You can reset the Learned Values by checking the items you would like to reset and pressing the [Reset] button.
(Learning Values screen)
[Reference]
The value to be reset is the preset initial value.
4 A confirmation screen will be displayed. Check the contents and click or press the [OK] button.
(Reset Confirmation screen)
[Reference]
Click or press the [Cancel] button to return to the Learned Values screen.
5 A message is displayed when writing to the device is complete.
(Reset Completion screen)
[Reference]
• This message is displayed regardless of whether the reset was successful or not.
• Items that have been successfully reset are displayed as
Successful in the ECU writing field.
• Items for which reset has failed are displayed as Failed in the ECU writing field.
More HINO DX3 User Guide,please refer to:How to Use HINO DX3
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…