Categories: Truck Repair

How to Reset/Rewrite Injector for FUSO Truck by XENTRY

After engine injector replacement,it is necessary to reset/rewrite injector data into ECU for FUSO truck.This post show the steps,hope it helps!

 

Related Contents:

2024.03 Benz Xentry.OpenShell.XDOS Diagnostic Software Free Download

How to Install Benz Xentry 2023.06 Diagnostic Software

 

Procedures:

As a preparatory step, replace the injector.
Reset the injector correction data.

(1) Select “Adaptations”.
(2) Select “Teach-in processes”.
(3) Select “001 Injection value (Reset)”.
(4) Select “S”

 

The method of “Injector injection quantity adjustment” is different by vehicle other than HEV and
HEV.
<In the cases of HEV>

(1) Select “Adaptations”.
(2) Select “Teach-in processes”.
(3) Select “016 Injection valve (Learned value)”.
(4) Select “S”(Green).

 

<In the cases of other than HEV>
Download the required ECU history data from the FRN and store it in the FUSO Diagnostics system.
Perform adjustment of injector injection quantity

(1) Select “Coding”.
(2) Select “Injector injection quantity adjustment”.
(3) Enter the inquiry number and password.
(4) Click “Continue”.

(5) Enter the adaptation values (IMA code) indicated on the injectors.
When an indicated adaptation value (IMA code) has eight digits, enter the seven digits except the unit digit. The alphanumeric characters “0”, “9”, “J” and “Q” are not used for the injector adaptation value (IMA code).
(6) Click “Continue”.
Upload the ECU history data to the FRN.

For more FUSO repair case,please refer to:FUSO Trouble Repair

auto

Recent Posts

JCB JS140/205/215 Excavator C1022-13 Coolant Temperature Sensor Open Circuit

This instruction show you guide on how to solve JCB JS140/205/215 excavator C1022-13 trouble code coolant…

2 days ago

How to Diagnostic and Repair PCC1302 PowerCommand Code 2972 – Field Overload

If the time that the Field AVR Duty Cycle is operating at maximum output is…

3 days ago

Caterpillar C9 Engine 15 164-3 Injection Actuation Pressure Voltage High

The Engine Control Module(ECM) detects the following conditions: The voltage for the injection actuation pressure…

4 days ago

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

1 week ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

1 week ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

2 weeks ago