Categories: Do It Youself

How to Reset Service Light for BMW 318i E92 2013

Here come the guide on how to reset service light for BMW 3 series,and here I take BMW 328i E92 2013 as example.It might be for the oil or it might be for a vehicle check brake pads fluid.

Vehicle Model Influence:

BMW 3 Series:E90,E91,E92,E93

Note:more detail info about reset service light for BMW 3 series to watch the video guide at end of article.

 

Procedures of resetting series:

Pop your key in just like so now you want to turn on your ignition,but you don’t want to start the actual engine off the car so I haven’t got my foot on the brake or the clutch and I’m just gonna press “Start”

Then it will bring up this screen here now what you want to do is you wanna whatever setting you’re on here.

You want to make sure it goes back to this bit here where you’ve got the temperature at the time and in this instance,because there is a UK car.It is in miles here so what you want to do is this button in the corner that you normally use to reset your trip.

Hold it until the warning symbol “!” appear.

Then you will see below,this particular one is for the brake fluid.

Move this stock here up and down to scroll through the different item.

At the moment I going down to reset the vehicle check,and then hold the “BC” button.

It will prompt you to reset.

Hold the “BC” button again,and then a little timer will come up and then it will reset to whatever the next vehicle check is again.If you want to do oil reset,scroll through the oil item,here it prompt next to on the 01/2019 or 18 thousand miles again.

To reset the oil just press the “BC” button,and it will ask you to reset and getting you hold “BC” button for a few seconds,then you will see a little clock come up and then it resetting itself.

Reset Service Light for BMW 318i E92 2013 Video Guide:

auto

Recent Posts

JCB JS140/205/215 Excavator C1022-13 Coolant Temperature Sensor Open Circuit

This instruction show you guide on how to solve JCB JS140/205/215 excavator C1022-13 trouble code coolant…

2 days ago

How to Diagnostic and Repair PCC1302 PowerCommand Code 2972 – Field Overload

If the time that the Field AVR Duty Cycle is operating at maximum output is…

3 days ago

Caterpillar C9 Engine 15 164-3 Injection Actuation Pressure Voltage High

The Engine Control Module(ECM) detects the following conditions: The voltage for the injection actuation pressure…

4 days ago

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

1 week ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

1 week ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

2 weeks ago