Categories: Do It Youself

How to restore headlight by yourself

The headlight plays a important role when we driving at night.Our driving safety depends on the stability of headlight working state.In this article you get skill about how to restore headlight by yourself.
Tool You Need:

1.Sandpaper with values:P400,P600,P2000.
2.Spray bottle
3.Isopropyl rubbing alcohot
4.Gloss clear(non-yellowing uv resistant)
5.tape,scissor,a piece of blace plastic cloth,normal paper

Step 1: We need to tap up the area all around the headlight.And make sure to tape up any and all paint surrounding the headlight.And then use water bottle to spray water on headlight while you use sandpaper sanding the headlight. It will take you a lot time to do it,pls be patient.


Note:First use P400 sandpaper,then use P600,finally use 1000.Sand in one direction. This makes it easier for you to check and see that your lines are consistent and that you have sanded the headlight evenly. It also helps to see anything you might have missed.Make sure to sand all the edges and all the corners. Do this for both headlights, making sure not to reuse the sandpaper from the opposite headlight. 1-1/4 piece of sandpaper per headlight.

Step 2: Wipe the headlight with paper sticky isopropyl.Cover the headlight with the black plastic cloth and tape it.After it dry use scissor cut out the headlight,tape the black plastic cloth around of headlight.

Step 3:Spray Gloss clear on the headlight,and spray after several minutes again.

 

Watch Video to Get More detail:

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

21 hours ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago