How To

How to Set DOIP for Benz MB SD C4 Diagnostic Kit on Win10

It is necessary to set DOIP for your MB SD C4 connect diagnostic kit,otherwise the DOIP function and wireless can not work well.

 

Preparations:

2024.03 Benz Xentry.OpenShell.XDOS Diagnostic Software Free Download

How to Install Benz Xentry 2024.03 Diagnostic Software

 

Steps:

Right click internet icon at right low corner to click “Open Network & Internet settings”

Click “Network and Sharing Center”

Then click “Ethernet” at your active networks

Click “Properties”

Select “Internet Protocol Version 4(TCP/IPv4)”,then click “Properties”

Select “Use the following IP address”,and select diagnostic IP address as below

IP address:172.29.127.35

Subnet mask:255.255.255.0

Then click “Advanced”

Click “Add”,then input IP address for MB SD C4 DOIP

IP Address:169.254.0.35

Subnet mask:255.255.0.0

auto

Recent Posts

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

1 day ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

4 days ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

2 weeks ago

How to do Perform Cylinder Cut-off Test for Massey Ferguson Tractor

This instruction show you guide on how to use AGCO EDT diagnostic software to perform…

2 weeks ago