Here is the instruction show you guide on how to set play between timing pinion teeth for CLAAS AXION 920 tractor.
Related Contents:
CLAAS CDS 7.5 Diagnostic Software 2021 2020 Free Download
CLAAS USB Interface Diagnostic Adapter Package
Claas WebTIC Offline Repair & Service 2024 2015 Free Download
Procedures:
Adjusting the clearance between the teeth on the high pressure pump
This adjustment is performed when the high-pressure pump and the camshaft have been removed.
► Undo the mounting bolts (1).
► Remove the adjusting flange (2).
Respect the technical specifications from the overview.
► Lubricate the two bearing faces on the special tool.
► Fit the adjusting flange on the tool.
► To make the tool easier to remove, ensure that the adjusting flange slides over the special tool.
► Fit the special tool.
► Bring the flange towards it and gradually tighten the bolt so that the flange is completely straight on the special tool.
► Remove the special tool using a plastic hammer, ensuring that the two centring devices on the special tool disengage at the same time.
Adjusting the clearance between the teeth on the intermediate pinion
To adjust the clearance between the teeth on the single intermediate pinion:
► The camshaft (1) must be refitted.
► The plate (2) must be fitted.
► The single intermediate pinion (3) must be removed.
Undo the bolt (1).
Respect the technical specifications from the overview.
► Fit the special tool between the camshaft and the shaft corresponding to the centre of the connecting rod intermediate pinion shaft.
► Tighten the bolt (1).
More repair case for CLAAS,please refer to CLAAS Trouble Repair