How to solve BMW E-sys Coding Software Error

One of my bloger reader sent e-mail to me about BMW E-sys error.Several days ago his BMW E-sys software was out of work,so he searched on internet for help.Finally,he find some errors and solution on BMW forum, and share how to solve BMW E-sys errors  with us.

BMW E-sys error 1:

When choose “Read Coding Data”, get this error:

Transaktions-Report: Aktion: Codierdaten lessen

CAS [40] [C271460]

readCPS o.k.

cafd_0000000f-005_022_007 Fehler:

File for “cafd_0000000f-005_022_007” not found! [C012]

Solution:

Make Sure you have copied the SWE contents from PSDZData/SWE to C:/EsysData/SWE (You should have it in both the locations)

 

BMW E-sys error 2:

Open E-Sys and when hit connect get the pop up which has my VIN next to that radio buttion, but nothing shows up in the Target box.

Solution:

More likely that the “dist” folders missing from your installation. The folders should be empty, but they need to be there:

make sure the folder names/directory is correct.

 

BMW E-sys error 3:

Ethernet Connection Problems

Solution:

Disconnect and Reconnect

 

BMW E-sys error 4:

Read FA failed! Possibly there is no FA stored in the VCM. [C060]

Solution:

There must be some OS or WLAN Adaptor setting that keeps the Wired and WiFi connections isolated or combined that is not set to isolate them.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

3 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

5 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

1 week ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

2 weeks ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

3 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago