Categories: Auto Repair

How to Solve Check Engine Light with Code P0014 on Cadillac SRX 2012

If you have a rough running engine in your Buick,Cadillac,Chevy,or GMC,and check engine light with trouble code P0014, this instruction will show you what causes this specific code and what you can do to check it out.

On Cadillac SRX 2012 with 3.6 liter V6 engine we get a code P0014 which is Exhaust Camshaft Position System Performance Bank1.

On this engine has VVT or variable valve timing, no matter what that does is that gives you extra horsepower and fuel mileage in small engine. You have rotating components inside the engine and the computer needs the time to those components, and if those components are not timed properly that’s when you get these codes.

One of the potential causes for this code is the camshaft position solenoid valves which are located on the front of the engine.

On this engine you have four of these solenoid valves, you have two on the back and two in the front. The lower one controls the timing for the exhaust, the upper one controls the timing for the intake. How these work is with redirecting oil pressure or oil flow. If your oil level is low or your oil is not up to par, they’re not going to work right. Before you go changing any of these components,you need to check your oil level to make sure it’s not low and the oil looks good.

If you’ve neglected to change your oil or it was extremely low, the damage is probably already done and you’ll need to change those solenoids.

Here’s what the solenoid valve looks like when it’s out of the vehicle. Here’s is where the oil goes in.

This different passages and what you need to check for is to see if you see any metal particles in there. We don’t see any metal particles which is good if you see metal on these screens, there is more internal engine damage and you’re going to have to go deeper into the motor than just changing the solenoid valves.

So changing that camshaft position actuator valve and changing the oils should fix your problem. A good way to prevent this is to keep up on your oil and double check your oil level regularly.

For more repair case about Cadillac,please check here:Cadillac Repair Cases

Kevin

Recent Posts

Caterpillar C9 Engine 15 164-3 Injection Actuation Pressure Voltage High

The Engine Control Module(ECM) detects the following conditions: The voltage for the injection actuation pressure…

40 mins ago

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

3 days ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

5 days ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

1 week ago

Perkins 800 Series Engine Water Temperature Regulator Housing Remove and Install

This instruction show you guide on how to remove and install water temperature regulator housing.…

1 week ago

Monza, Kadett and Ipanema Multec 700 GM ECU Components Pinout

Monza, Kadett and Ipanema Multec 700 GM ECU Components Pinout   Vehicles: Monza, Kadett and…

1 week ago