This diagnostic should only be performed after a manual compression test has been performed to ensure low engine compression is verified.
Related Contents:
2024.06 Detroit Diesel Diagnostic Link DDDL 8.20 8.09 Free Download
Procedures:
1 Are all the actuator pistons on the engine brake rocker arms retracted (1)?
1a Yes; Go to step 2.
1b No; replace the engine brake rocker(s) that have a stuck actuator piston (2).
2 Check the camshaft timing.Camshaft Timing Verification. Do the camshaft timing marks line up per procedures?
2a Yes; Go to step 3.
2b No; correct engine/camshaft timing and verify repair.
3 Check valve lash and engine brake adjustments.
3a Yes; Go to step 4.
3b No; Go to step 5.
4 Conduct a Mechanical Cylinder Compression Test.Is compression within specification?
4a Yes; reassemble the engine and verify repairs.
4b No; Go to step 5.
5 Remove the cylinder head.
5a For the DD13, Removal of the DD13 Cylinder Head Assembly
5b For the DD15 and DD16, Removal of the DD15 and DD16 Cylinder Head Assembly
6 Inspect the cylinder head gasket for damage or exhaust leaks around the fire seals. Is the seal damaged or showing evidence of exhaust leaks?
6a Yes; measure the liner protrusion.
6b No; Go to step 7.
7 Inspect the following engine components:
7a Inspection of the Cylinder Head
7b Inspection of the Cylinder Liner
7c Further Analysis of the Cylinder Liner
7d Inspection of the Piston, Piston Rings and Connecting Rod
7e Inspection of the Intake and Exhaust Valves
8 If necessary, inspect the main bearings.
9 Has the cause of low compression been identified?
9a Yes; complete repairs, verify and release vehicle.
9b No; contact Detroit™ Customer Support Center at 800-445-1980.
More repair cases for Detroit Diesel engines,please refer to:Detroit Diesel Engine Repair
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…