Heavy Equipment Repair

How to Solve HINO J05E Engine P0027 Exhaust Brake Performance Error

This instructions show you guide on how to solve HINO J05E engine 2018 P0027 exhaust brake performance error.

 

Related Contents:

Nexiq USB2 Diagnostic Adapter

2024.02 HINO Diagnostic Explorer DX3/DX2 Diagnostic Software Free Download

HINO Trucks EPC Electronic Parts Catalog 2018 2016 Free Download

 

 

Description of Malfunction:

1)The engine ECU detected sticking of the exhaust brake valve.

1) DTC Detection Condition:

  1. a) DPR regeneration is in process.
  2. b) The vehicle speed is 0 km/h.
  3. c) The time of 60 seconds has elapsed after the exhaust brake was actuated.

 

DTC Set Condition:

2) Judgement Criteria:

while the exhaust brake is working and the air flow when the exhaust brake is not actuated is -50 mg/cyl or more.

  1. a) The difference between the fuel injection quantity while the exhaust brake is working and the fuel injection quantity when the exhaust brake is not actuated is 5 mm3/st or less. And also, the difference between the air flow

 

Reset Condition:

1) Immediately after normal status is resumed

Indication, Warning or System Control Regulation When The DTC Is Set:

1) MIL: ON

2) SVS light: OFF

Symptoms On The Vehicle The DTC Is Set:

1) Symptoms On The Vehicle Due To Backup Control (Fail Safe Function):

  1. a) None

2) Symptoms On The Vehicle Due To Malfunction:

  1. a) The exhaust brake does not work.
  2. b) DPR regeneration is not terminated successfully.

 

Pre-Inspection Work:

1) Check that the battery voltage is in the normal range.

 

After-Inspection Work:

1) Clear all past DTCs.

2) Check that no DTC is detected after test drive.

 

Possible Causes:

1) Abnormality in characteristics of air flow meter

2) Diesel throttle (intake throttle valve) sticking

3) Bend, clogging, and crack of piping and hose

4) Improper adjustment of exhaust brake valve

5) Malfunction of exhaust brake valve

 

More case for HINO please refer to:HINO Trouble Repair

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

2 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

5 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

1 week ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago