Here is a guide show on how to use Autel KM100 programmer to generate a new key for BMW 1 series 2010-2016. More about BMW cases please refer to:BMW Trouble Repair.
Preparations:
Autel MaxiIM KM100 with BMW Key
Procedures:
Select “Universal Key”
Select Region “Europe”
Make “BMW”
And select “BMW 1 Series 2010-2020”
434.64MHz,FSK,ID49
Input new key into the Autel KM100 programmer slot
Ensure that there is only one universal key within 10 cm of the key slot of the device to avoid interference.
Press “Generate Universal Key”
Generating universal key,please wait
Universal key generation is completed.
Done.
More Autel devices real feedbacks,please refer to:Autel Devices Feedback
This instruction show you guide on how to solve Bobcat machine trouble code P18A5 suction…
The measured intake manifold pressure (signal from boost pressure sensor) is below the warning limit…
JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…
Here is the instruction show you guide on how to replace fuel tank breather filter…
FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…
Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…