CAT ET diagnostic software WinFlash function can be used to set up and consecutively program the Flash memory of all onboard ECMs.Here in this instruction car-auto-repair.com show you guide on how to use Caterpillar Electronic Technician service tool WinFlash function.
Related Contents:
Caterpillar ET 2023C 2019C 2018A Electronic Technician Free Download
CAT Adapter 3 ET4 478-0235 High Quality Diagnostic Adapter
Caterpillar SIS 2021 2019 2018 Full EPC+Service Manual Free Download
Caterpillar Factory 18 Digits Password Service
Instructions
To run the WinFlash tool:
Select “WinFlash” from the Utilities menu
OR-
Click the WinFlash icon
The Connection message box displays until WinFlash establishes communication with the ECM(s). To stop the connection process, click the Stop Connect button.
Note: This connection process displays regardless of connection status.
To utilize the flash function via Ethernet, see IP Flash over Ethernet.
Note: IP Flash over Ethernet is only supported for flashing and is not available for general servicing.
Screen Layout
The WinFlash screen has the following areas:
Menu Items
The functions available within these menus are some of the same functions found on the service tool main screen. The exceptions are:
File…Update ECM List – Select this option to update the ECM list once a connection to WinFlash has been established. Communication between any ECM(s) and WinFlash will be reestablished.
File… Return to [service tool] – Select this option to exit the WinFlash screen and return to the service tool main screen.
ECM Information area
This area lists all the ECMs on the data link and includes the following information:
Connection Icon
ECM type, data link type, ECM serial number, and Current Software part number
Note: For some products, location code displays next to the ECM serial number.
Note: If the ECM is not programmed, the current software number will read “None”.
Flash File Information area
When a file is selected from the File Selection dialog box, the file name and location, as well as a brief description of the file, if available, is displayed. The following buttons are available in this area:
ECM/File Information area
This area is displayed when a flash file has been selected. It includes three columns:
Parameters column – lists reference parameters that will be useful when selecting a file
ECM Values column – lists information currently in the ECM
File Values column – lists the information of a file selected in the File Selection dialog box
Button
The button available on this screen is:
Begin Flash
Note: The Browse Files… button, which allows the user to view flash file information, is available when a connection to an ECM has not been established through a data link connection or Trainer.
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…