How to Use Caterpillar ET Diagnostic Software Trainer Function

Caterpillar ET diagnostic software Trainer function runs the service tool in a training mode. This provides an opportunity to become familiar with the service tool without connecting to an Electronic Control Module (ECM) or a Communication Adapter. There is no charge for Trainer and authorization is not required.

 

Related Contents:

Caterpillar ET 2024A 2023C 2019C 2018A Software Free Download

CAT ET4 478-0235 Adapter 3

Caterpillar Factory 18 Digits Password Service

 

How to Use:

Step 1 Click the “Start” button on the Task Bar. Select “Caterpillar ET” from the Programs menu, and then select “Electronic Technician” from the sub-menu. The  Connection message box is displayed:

Step 2 Click the “Stop Connect” button. The Service Tool main screen is displayed.

Step 3 Select “Trainer” from the Help menu, and then select “Enable” from the sub-menu.

Or, click the “Enable Trainer” icon if default toolbar is set.

The “Trainer” dialog box is displayed:

Step 4 Select a product from the Application menu.

Step 5 To start Trainer, click the “OK” button. The Connection message box is displayed. The ECM Summary screen displays in Trainer Mode if the default startup tool is set. Once started, Trainer simulates some of the service tool functions.

 

Note: When the service tool is operating in training mode, “Trainer Active” displays.
To change the product simulated within Trainer:
Step 1 Select “Trainer” from the Help menu, and then select “Properties” from the submenu. The Trainer dialog box is displayed.
Step 2 Select a different product from the Application drop-down list.
Step 3 Click “OK.” The Connection message box is displayed. The ECM Summary screen for the new product displays in Trainer Mode.

To exit Trainer:
Select “Trainer” from the Help menu and select “Disable” on the sub-menu or click the “Disable
Trainer” icon.

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

2 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

4 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

1 week ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago