For some Mercedes Benz ECUs need just one CFF flashed and other ECUs need to have flashed more than one CFF at once.Here car-auto-repair.com show the guide on how to use DTS Monaco to flash Benz ECUs with CFF.More about DTS Monaco projects,please check it here:Benz DTS Monaco cases.
Note:After flashing a quick test/kurztest with delecting all errors/DTS is recommend.
Preparations:
Benz DTS Monaco Software Free Download
How to Install Mercedes Benz DTS Monaco Software
Procedure:
The CFF file/files should be placed into the CBF folder Then the corosponding CFF to one ECU will be here shown.
1.Open the flashbrowser
2.Connect to the ECU->start the communication
3.Choose the needed CFFs so that they appear at the area at the right side
4.Check or uncheck the one you want or don’t
5.Press start
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…