Categories: How To

How to Use eTechnician Diagnostic Software Function Test?

Nexiq eTechnician™ provides a number of special tests to assist you with your vehicle diagnostic efforts. Most tests require you to connect eTechnician™ to a running vehicle.The tests available differ depending on the module to which you are connected.
From the Tests tab you can:
• View of list of available tests for the modules to which you are currently connected.
• View Test Information for each test listed.
• Select a test and run it.

 

Related Contents:

2023 Nexiq eTechnician 2.8 2.1 1.1 Diagnostic Software Free Download

NEXIQ USB LINK 2 Adapter

 

To view the list of available tests:
1 Click on the Tests tab on the left side of the display

2 Use the scroll bar on the right side of the screen to scroll down through the list of available tests.

3 Click on the Info icon for a particular test (e.g., EGR Cooler Bypass Valve) to learn more about the test.
A Test Information screen for that test is displayed.

4 Review the information, including any Test Tips that might be included.
5 (optional) Click Print to send the information to a printer.

NOTE:
If you are not connected to a printer, you can save the information to a file in the location of your choice.
6 Click Close to return to the list of available tests.

 

Running a Test
Most special tests operate the same or in a similar way. The following screens are for illustration only.
To select a test and run it:
1 Start at the list of available tests.

2 Click on a test to select it (e.g., Fuel Pressure Control)

Some tests have preconditions that must be met before you can start the test (e.g., a required engine speed, or specific engine coolant temperature).

Should you encounter a message of this type, click Quit, meet the precondition, and select the test again.Other tests open directly once you select them.

3 Click Start to begin the test, and follow any on-screen prompts.
4 Click Quit to end the test.
The list of available test is displayed again

auto

Recent Posts

Volvo and Mack EPA 10 Engine Hydrocarbon Dosing Control Valve Test by JPRO

This instruction show you guide on how to perform hydrocarbon dosing control valve test for…

2 days ago

Fendt Tractor SPN 100 FMI 31 Oil Pressure Sensor Defect Solution

This instruction show you guide on how to solve Fendt tractor SPN 100 FMI 31…

4 days ago

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure

Detroit GHG17 Heavy Duty Engine Piston Protrusion Measurement Procedure   Related Contents: 2024.06 Detroit Diesel…

6 days ago

Perkins 800 Series Engine Water Temperature Regulator Housing Remove and Install

This instruction show you guide on how to remove and install water temperature regulator housing.…

1 week ago

Monza, Kadett and Ipanema Multec 700 GM ECU Components Pinout

Monza, Kadett and Ipanema Multec 700 GM ECU Components Pinout   Vehicles: Monza, Kadett and…

1 week ago

How to Remove Oil Pressure Regulation Valve for CLAAS AXION 950

This illustration show you guide on how to remove oil pressure regulation valve for CLAAS…

1 week ago