Categories: Truck Repair

How to Use HINO DX3 Simulation Function

HINO DX3 Simulation functions is new feature for HINO DX3,which make your work easy and improve your skills.Here car-auto-repair.com show you guide on how to use it.

 

Related Content:

JPRO DLA+ 2.0 Adapter /Nexiq USB2 Diagnostic Adapter

2024.03 HINO Diagnostic Explorer DX3/DX2 Diagnostic Software Free Download

HINO Trucks EPC Electronic Parts Catalog 2018 2016 Free Download

 

Procedures:

1.Select ON in Simulation mode, enter the user ID and password; then press the [Login] button.

2.The DX III home screen appears.

[Reference]
• During Simulation mode, “sim” is displayed at the bottom left of the home screen.
• Functions that are grayed out cannot be used during Simulation mode.

3.Click or press the [Connect] button

4.Since the Vehicle Selection Method screen is displayed,select the method for obtaining vehicle information. Press the [Vehicle Classification] button.
[Reference]
• If you enter a VIN for which the on-board device information is automatically uploaded to GSPS, you can perform the simulation with the on-board device information applied.

5.Select the vehicle classification and Area; select the software number of each device; then press the [OK] button.

Click or press the [Diagnosis/Customization] button.

7.Reading DTCs starts.
[Reference]
• While the DTCs are being read, a message stating, “the vehicle information is being read out,” is displayed.

8.The System Selection screen is displayed. Each function can be simulated.
[Reference]
• Subsequent operations are the same as in normal mode.
• Operation during the Simulation mode is not recorded in the history.

More case for HINO please refer to:HINO Trouble Repair.

auto

Recent Posts

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

2 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

5 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

2 weeks ago

How to Adjust Cruise Control Release Linkage for Kubota L3901 Excavator?

This is instruction show you guide on how to adjust cruise control release linkage for…

3 weeks ago