This instruction show you guide on how to use MPDr diagnostic software to set collision prevention for Hitachi excavator.
Preparations:
Hitachi MPDr v2.56 v2.25 Diagnostic Software Free Download
Procedures:
Run MPDr software and select “Functions”
Select “Special specification macine”
Select “Collision Prevention Setting”
Click the [Select] button.
To select all items, click the [[F1] Select All] button.
Click the [[F4]Present Value] button.
To change setting, change the [Changed Value] drop down menu.
Click the [[F5]] button.
Click the [Yes] button.
Click the [OK] button.
The setting has completed.
Other settings can be set with the same procedure.
More repair cases for Hitachi excavator,please refer to:Hitachi Excavator Trouble Repair.
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…