In this instruction i will show you how to use Scania SOPS and XML editor to change speed limit for Scania.
What You Need?
Scania NEW 2018 SOPS +XML Editor Support NEW SDP3
2024.07 Scania SDP3 V2.61.2 V2.40 Diagnostic Software Free Download
2023 2018 Scania Multi EPC Parts Catalogue Free Download
Procedures:
Read out ECU data file via Scania SDP software,then save it on you PC.(In this example,it is “3667094.1.sops”)
Run Scania SOPS editor and click “Decrypt” button,then select ”3667094.1.sops” file
Then is will generate a decrypted file “3667094.1.sops.decrypted”
Use the XML editor (in the download file) to open the decrypted sops file,it show as below
Locate the “SpeedLimit” value,here the original value is “85”
Now change the original file to “120”
Select “File” from menu,and select “Save As” to save this file.
Here we select to overwrite the original file
Click OK
Note:It is recommend you to open the file again to ensure the value has been changed
Run Scania SOPS editor to load the file you changed and Encrypt it
It generate a new SOPS file
And now you can use Scania SDP3 software to write the new file back t ECU.
Done!
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…