In this article i will show you the guide on how to use Volvo PTT to select DTCs Manually,and i have write another article:How to Use Volvo PTT Diagnostic a Fault Code you can click it for DTCs selection automatically.
What You Need?
2024 Volvo TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download
Volvo Diagnostic Kit (88890300)
Volvo VOCOM 88890300 Diagnostic Kit
Procedures:
Run Volvo PTT software,and login but not connected to a vehicle
Click “Manual Selection”
Enter the vehicle information
Enter a work order number,or chose from the list
Then click “Program”
Click on the “Continue” button
Click the “Edit List” button
The “Edit DTC list” will appear,now type in or scroll to find your code.
Set a status for the DTCs that you want to add to the DTC list.To change the status of a DTC,click the Status column of that DTC.To filter the list,enter text in Filter DTC.All DTCs containing that text will automatically be shown.
Use the “up” or “down” arrows to set the status to Active or Inactive.
Click “OK” when finished.
Done!
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…
This is instruction show you guide on how to adjust cruise control release linkage for…