Categories: Auto Key Program

How to Use Zed-Full Unlock FIAT ID46 Transponder

Zed-Full support you to unlock transponders and remotes which are locked with failure during programming procedure or in case of using wrong transponder (i.e. Using FIR104 instead of FIR103) while key programming with Zed-Full for the FIAT Magnetti Marelli and Delphi BSI installed vehicles.

 

This feature is available with the OBD v1.3.29 and further versions.Unlock can be done only for the transponders and remotes (OEM or iEA made) used with Zed-Full with the version given above.

 

Enter Zed-Full menu to select “Key”

Select “Read Cloning”

Please insert the key or transponder that you want to read to the antenna as shown in the picture then press “Read” button

Mode:Locked-Manchester

Then back main menu to select “OBD Application”

Select “Fiat”

Select “Fiat EU”,the press “Continue” button

Select “Immobiliser” and press “Continue” button

Select “Unlock 46 Transponder” and press “Continue” button

Place the transponder to Zed-Full antenna,which is used during Zed-Full OBD key programming procedure,and press “Continue” button.

Transponder unlock successful.

Now we can back to read and check the key status,back to main menu to select “Key”

Press “Reading Cloning”,the click “Read”

The Zed-Full immobilizer solution will show you the key status:

Mode:Cipher-Manchester,it mean unlocked

Done!

auto

Recent Posts

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

21 hours ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

3 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

6 days ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

1 week ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

2 weeks ago

How to Solve Fendt 800 Vario S4 wayline Running Slow

If the vehicle is oscillating on the wayline or catches up the wayline very slowly…

3 weeks ago