This instruction show you guide on how to replace Allison transmission control modules for ISUZU F-Series 6.7L diesel truck.
Related Contents:
ISUZU US-IDSS II 2024 2019 Diagnostic Software Free Download
2024 2019 Isuzu G-IDSS Export Diagnostic Software Free Download
ISUZU IDSS MX2-T Diagnostic Adapter
Transmission Control Module (TCM) Replacement
The Transmission Control Module (TCM) (TCM Connector B-228) is located on the front crossmember in the left front corner of the frame area.
Removal Procedure
1 Remove the 3 nuts and bolts (2) securing the TCM cover (1) to the frame.
2 Unthread bolt securing the TCM harness connector B-228 to the TCM and remove the connector.
3 Remove the bolts (1) securing the TCM to the frame and remove the TCM.
Installation Procedure
1 Install the TCM with the 3 bolts (1) to the frame.
Tighten the TCM bolt to 10 N·m (7.3 lb·ft)
2 Connect the TCM harness connector B-228 and tighten the connector bolt.
Tighten the electrical connector bolt to 2 N-m (17 lb in).
3 Install the TCM cover (1) with the 3 bolts (2) to the frame.
This instruction show diagnostics steps for Caterpillar C9 engine coolant level signal invalid fault code…
This instruction show you guide on how to solve Doosan heavy duty machine engine fault…
Here is the instruction show you guide on how to solve Allison 3000 & 4000…
Detroit GHG17 Heavy Duty Engine Power Verification With Chassis Dynamometer. The chassis dynamometer is a…
Here is the instruction show you guide on how to perform fuel system test for…
Vehicles: Vectra 2.0 Flex and Astra Flex More ECU PINOUT Components: ECU Modules Repair Pinpout…