This instruction show you guide on how to use Launch X431 to perform service light resetting for Jaguar 2012.More Jaguar repair,please check here:Jaguar Repair Cases
Operation Procedures:
1) Select the Jaguar V19.00 or above;
2) Select the Manual Select;
3) Select the F model;
4) Select the 2014-2015 (Notice: The actual measured vehicle model is 2012 model);
5) Select the turbocharging engine;
6) Select the System Select;
7) Select the PCM (Powertrain Control Module)
8) Select the Special Function;
9) Select the Service Interval Reset;
10) Turn the ignition to Position 2 as required;
11) After the “Service Interval Reset” indicated, click Confirm;
12) After the module initialized, it displays Completed
13) After “Turn the ignition off” indicated, click Confirm;
14) After the procedure successfully carried out, it indicates to clear DTCs for the vehicle,whether you clear DTCs or not, it does not affect the procedure execution result.
More Launch X431 Training article,please check here:Launch X431 use guide
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…