To fulfill their sealing function, the sealing surfaces and threads are designed to meetthe relevant requirements.
The application of forces exceeding the maximum values indicated in the tables willdamage and destroy the screwed connection, seals or housing.
Related Contents:
Jungheinrich JETI ForkLift Judit-4 v4.37 4.34 2023 Free Download
Jungheinrich JETI ET 4.37 4.34 EPC 2023 Free Download
2022 Jungheinrich Forklift JETI SH v4.36 v4.34 Service Free Download
Table 1 -Tightening torque for screwed connections
Examples:
With copper sealing ring:admission pressure values, screwed sockets,banjo-bolts with ring sockets, etc.
Without copper sealing ring:screw plugs, union nuts, brake hose fittings,venting valves M 10 and larger.
In the case of cadmium-plated threads 0.7 of the above values must be applied.
This symbol is used before safety instructions that have to be observed in order toprevent any danger to personnel.
This symbol is used before instructions that have to be observed in order to preventany damage to assemblies.
Table 2 – Tightening torque for brake components
Prior to installation,apply brake cylinder compound or brake mounting spray to thethreads.
For more Jungheinrich trouble repair case,please refer to Jungheinrich Trouble Repair
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…