Truck Repair

Jungheinrich Junior AME13 Directives for Executing Screwed Joints

Related Contents:

Jungheinrich JETI ForkLift Judit-4 v4.37 4.34 2023 Free Download

Jungheinrich JETI ET 4.37 4.34 EPC 2023 Free Download

2023 Jungheinrich Forklift JETI SH v4.36 v4.34 Service Free Download

 

 

Cut pipe at right angle and deburr

All threaded parts must be oiled (do not grease)

Push nut l and cutting ring 2 over the end of pipe 3

1.Screw nut by hand onto the male member.

2.Push pipe in till it comes to rest.

3.Tighten with wrench about 3/4 turn.

4.The cutting ring will cut itself with its edge into he pipe.

5.Unscrew nut fom male member.

1 Checking the cutting edge.

It is of no importance if the cutting ring can be turned on the end of the pipe.

2 The final fitting on the male member is performed with another 3/4 turn.

For more Jungheinrich trouble repair case,please refer to Jungheinrich Trouble Repair

auto

Recent Posts

How to Remove Second Tank for CLAAS AXION 960-920 Tractor

This instruction show you guide on how to remove second tank for CLAAS AXION 960-920…

12 hours ago

Doosan Excavator P0408 Maximum EGR Rate Governor Deviation Error Solution

This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…

3 days ago

How to Calibrate 2403 Steering Valve for Fendt 800 S4 Tractor

Here is the instruction show you guide on how to calibrate 2403 steering valve for…

6 days ago

Massey Ferguson Tractor Electrohydraulic Spool Valves Configuration

This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…

1 week ago

How to Remove Center Joint and Center Frame for HITACHI Hitachi EX5600-7B

This instruction show you guide on how to remove center joint and center frame for…

2 weeks ago

How to Repair Doosan Machine P0100 DTC Signal Error

How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…

3 weeks ago