This illustration show you guide on how to use Kubota Diagmaster to do tank heater coolant valve active test for Kubota engine.
Preparations:
2022 Kubota Takeuchi Diagmaster v22.08.01 v4.1.2 Software Free Download
Kubota EPC Spare Parts Catalogue 2021.06 Download
Takeuchi Excavator Workshop EPC+Service Manual 2018 PDF Files
Procedures:
Start engine and leave in idle state.
Connect engine and PC, and start Diagmaster.
Choose Tank heater coolant valve ON/OFF function(ACU) from active test.
Adds coolant valve status to data monitor and starts to log.
Starts active test.
Check that valve operates 3 times automatically.
Used primarily for purging the system.
More repair case for Kubota,please refer to:Kubota Trouble Repair
This instruction show you guide on how to solve Doosan excavator P0408 maximum EGR rate…
Here is the instruction show you guide on how to calibrate 2403 steering valve for…
This function requires all connectors to be disconnected from all electrohydraulic valves on the tractor.You…
This instruction show you guide on how to remove center joint and center frame for…
How to solve Doosan heavy duty machine P0100 fault code signal error of air mass…
If the vehicle is oscillating on the wayline or catches up the wayline very slowly…